Data and deliverability

Cold email deliverability: what Gmail, Yahoo and Outlook now require

By , . 9 min read.

Contents

Cold email deliverability is the ability of a prospecting email, sent to someone who has not asked to hear from you, to reach the inbox rather than the spam folder or nowhere at all. It is the step in the B2B prospecting chain nobody notices while it works and everybody pays for when it breaks: a filtered message goes unread, and a domain with a poor reputation drags down the emails you send to customers too. Between February 2024 and May 2025, Google, Yahoo and Microsoft each published specific requirements for senders. Read at source, those rules translate into checks to run before any outbound campaign, in-house or outsourced.

In short: since 2024, Gmail and Yahoo have required every sender to authenticate with SPF or DKIM and to keep spam complaints below 0.3%. Above 5,000 messages a day to Gmail, you also need SPF and DKIM together, an aligned DMARC record and one-click unsubscribe. Microsoft has required SPF, DKIM and DMARC from high-volume senders to Outlook.com since 5 May 2025. Meeting the full set even at low volume is the simplest precaution.

What is cold email deliverability?

It is the share of your messages that actually reaches your recipients' inboxes. It depends on what the receiving mailbox knows about your domain (its technical identity and its reputation) and on how recipients react to what you send.

Four terms come up everywhere and deserve a clear definition:

  • SPF (Sender Policy Framework): a DNS record listing the servers allowed to send email for your domain;
  • DKIM (DomainKeys Identified Mail): a cryptographic signature added to each message, proving it has not been altered and that it comes from your domain;
  • DMARC (Domain-based Message Authentication, Reporting and Conformance): a DNS record telling mailbox providers what to do with a message that fails SPF and DKIM (p=none: take no action but report; p=quarantine: send to spam; p=reject: refuse it);
  • alignment: the domain shown in the From field must match the domain validated by SPF or DKIM. Without alignment, authentication can technically pass while giving no protection to the address the recipient actually sees.

What does Gmail require from senders?

Since 1 February 2024, Google has set two tiers: rules for every sender, and extra rules for anyone sending more than 5,000 messages a day to Gmail accounts.

Requirement All senders More than 5,000 messages a day to Gmail
Authentication SPF or DKIM SPF and DKIM (DKIM key of at least 1,024 bits, 2,048 recommended)
DMARC Not required A DMARC record is mandatory; a p=none policy is accepted
Alignment Not required From domain aligned with the SPF or DKIM domain
Spam complaint rate Below 0.3% in Postmaster Tools Below 0.3%; Google recommends staying under 0.1%
Unsubscribe Not required by Google One-click unsubscribe for marketing messages, plus a visible link in the body
Infrastructure Valid forward and reverse DNS (PTR record), TLS connection, format compliant with RFC 5322 Same

Google phased these rules in. Senders who already had an unsubscribe link were given until 1 June 2024 to move to one-click unsubscribe. Its FAQ page states that from November 2025 Gmail is ramping up enforcement on non-compliant traffic, which may face temporary or permanent rejection.

Postmaster Tools is Google's free service showing your spam complaint rate and your domain's compliance status. A prospecting domain should be registered there before the first send.

What do Yahoo and Outlook require?

Yahoo asks for broadly the same as Gmail. Microsoft focuses on authentication for high-volume senders to its consumer mailboxes.

Yahoo requires SPF or DKIM and a complaint rate below 0.3% from all senders. Bulk senders must use both SPF and DKIM, publish a DMARC policy of at least p=none that passes (relaxed alignment is accepted), support one-click unsubscribe (the RFC 8058 POST method is strongly recommended) and honour unsubscribe requests within two days. Yahoo points out that it calculates the complaint rate on mail delivered to the inbox, so your own figures may differ.

Microsoft announced on 2 April 2025 requirements for domains sending more than 5,000 messages a day to Outlook.com, Hotmail.com and Live.com addresses: SPF must pass, DKIM must pass, and DMARC must be at least p=none and aligned with SPF or DKIM (both preferred). Enforcement began on 5 May 2025. The post, updated on 29 April 2025, describes both rejection with the code 550 5.7.515 and routing to Junk ahead of rejection at a date to be announced: check Microsoft's page before relying on either.

Do the rules apply to low-volume prospecting?

Partly, and it is safer to act as if they applied in full. Gmail's and Yahoo's all-sender rules apply from the first message; only the stricter requirements depend on the 5,000-a-day threshold.

The 0.3% complaint threshold applies to everyone, and because it is a proportion, a small, poorly targeted campaign can hit it faster than a large, well-targeted one. DMARC, for its part, protects your domain against spoofing, a risk that has nothing to do with how much you send.

Google's rules concern messages received by Gmail accounts; Microsoft's concern its consumer services, Outlook.com, Hotmail and Live. The business mailboxes hosted on Google Workspace or Microsoft 365, which B2B prospecting reaches most often, run their own filters without an equivalent published checklist. That a compliant domain fares better there is a reasonable assumption; no published rule confirms it.

Unsubscribes: what mailbox providers and the law expect

Two layers apply at once: the mailbox providers' technical rule and the legal rule. The legal rule applies to every prospecting email, whatever the volume.

In the UK, PECR requires you to identify yourself and to give a valid way to opt out when you email corporate subscribers without consent; sole traders and some partnerships need consent or the soft opt-in in the first place. If you also email prospects in the United States, the CAN-SPAM Act covers business email and gives you ten business days to honour an opt-out. On the technical side, one-click unsubscribe relies on two message headers: List-Unsubscribe, which holds the unsubscribe address, and List-Unsubscribe-Post set to List-Unsubscribe=One-Click, which lets the mailbox show an "Unsubscribe" button. Gmail also wants a visible link in the body, and Yahoo wants requests processed within two days.

In practice, a clean prospecting email carries a plain exit line at the end ("If this is not relevant, reply 'no' or click here and I will not write again"), the unsubscribe headers generated by your sending tool, and a link to a page explaining where your data came from. Our "You received a message from LaMachine" page is one example of that last element.

The pre-send checklist

Run these checks in order before any campaign; the early ones determine the later ones.

# Check How to verify it
1 SPF published and current, covering every sending service you use The domain's TXT record; header check on a real send
2 DKIM active, 2,048-bit key DKIM-Signature header of a received message, result pass
3 DMARC published, at least p=none, with a reporting address (rua) The domain's _dmarc record
4 From domain aligned with SPF or DKIM dmarc=pass in the headers of a message received at Gmail
5 Domain registered in Google Postmaster Tools Complaint rate reviewed weekly, aiming for under 0.1%
6 One-click unsubscribe headers and a visible link Reading the headers of a test message
7 Verified list (valid addresses, no traps or duplicates) Bounce rate on the first send
8 Gradual volumes, consistent with the domain's history Step-by-step ramp-up, tracked in the sending tool
9 Targeting and copy reviewed: every recipient has a reason to receive this message Complaint rate and negative replies after the first send

Checks 7 to 9 appear in no mailbox provider's written requirements, but they are what keeps complaints low. A perfectly authenticated domain sending irrelevant messages still ends up in spam.

The LaMachine method treats deliverability as a step of its own in the chain, reviewed every week rather than set once at launch.

Frequently asked questions

Is DMARC at p=none enough?

To meet the Gmail, Yahoo and Microsoft requirements, yes: all three accept p=none. Microsoft then recommends moving gradually to p=quarantine and p=reject once all your legitimate sending sources are aligned, which gives your domain better protection against spoofing.

Should I use a separate domain for cold email?

It is common practice, and several agencies build it into their set-up: a dedicated domain or subdomain keeps the reputation of prospecting emails apart from that of your main domain. It must be authenticated like the main one, carry your brand clearly and point to your real website, or it will put off recipients and filters alike.

How can I tell whether my emails are landing in spam?

Watch the complaint rate in Google Postmaster Tools, bounce and reply rates in your sending tool, and send regular test messages to Gmail and Outlook mailboxes you control. A sudden drop in replies with no change of copy is often the first sign.

How quickly must I process an unsubscribe?

Yahoo asks for two days at most; the CAN-SPAM Act allows ten business days for US recipients. PECR requires a valid opt-out; in practice, remove the contact from every sequence as soon as they ask.

Sources

  1. Google Workspace, Email sender guidelines, in force since 01/02/2024.
  2. Google Workspace, Email sender guidelines FAQ, 01/06/2024 deadline and enforcement ramp-up from November 2025.
  3. Yahoo Sender Hub, Sender Best Practices.
  4. Microsoft Defender for Office 365 Blog, "Strengthening Email Ecosystem: Outlook's New Requirements for High-Volume Senders", 02/04/2025, updated 29/04/2025.
  5. ICO, Business-to-business marketing. The page blocks automated reading; its content was checked through search results restricted to ico.org.uk.
  6. Federal Trade Commission, CAN-SPAM Act: A Compliance Guide for Business.

Sources last checked: 18 November 2026.


LaMachine: deliverability, a step tracked every week

LaMachine is a B2B sales agency that designs, launches and runs prospecting operations for its clients. The sending domain, its authentication and its complaint rate are among the steps measured and reported, alongside replies and meetings.

Book a sales diagnostic to have your domain and sending set-up checked.

All articles